move manpages to subfolders

1 files changed, 0 insertions, 220 deletions

diff --git a/sway.5.txt b/sway.5.txt
deleted file mode 100644
index 24467d22..00000000
--- a/sway.5.txt
+++ /dev/null
@@ -1,220 +0,0 @@
-/////
-vim:set ts=4 sw=4 tw=82 noet:
-/////
-sway (5)
-========
-
-Name
-----
-sway - configuration file and commands
-
-Description
------------
-
-A sway configuration file is a list of sway commands that are executed by sway on
-startup. These commands usually consist of setting your preferences and setting
-key bindings. An example config is likely present in /etc/sway/config for you to
-check out.
-
-All of these commands may be issued at runtime through **sway-msg**(1).
-
-Commands
---------
-
-**bindsym** <key combo> <command>::
-	Binds _key combo_ to execute _command_ when pressed. You may use XKB key
-	names here (**xev**(1) is a good tool for discovering them). An example
-	bindsym command would be _bindsym Mod1+Shift+f exec firefox_, which would
-	execute Firefox if the alt, shift, and F keys are pressed together. Any
-	valid sway command is eligible to be bound to a key combo.
-
-**exec** <shell command>::
-	Executes _shell command_ with sh.
-
-**exec_always** <shell command>::
-	Like exec, but the shell command will be executed _again_ after *reload* or
-	*restart* is executed.
-
-**exit**::
-	Exit sway and end your Wayland session.
-
-**floating** <enable|disable|toggle>::
-	Make focused view floating, non-floating, or the opposite of what it is now.
-
-**floating_modifier** <modifier>::
-	When the _modifier_ key is held down, you may use left click to drag floating
-	windows, and right click to resize them. Unlike i3, this modifier may also be
-	used to resize and move windows that are tiled.
-
-**focus** <direction>::
-	Direction may be one of _up_, _down_, _left_, _right_, or _parent_. The
-	directional focus commands will move the focus in that direction. The parent
-	focus command will change the focus to the parent of the currently focused
-	container, which is useful, for example, to open a sibling of the parent
-	container, or to move the entire container around.
-
-**focus** output <direction|name>::
-	Direction may be one of _up_, _down_, _left_, _right_. The directional focus
-	commands will move the focus to the output in that direction. When name is
-	given the focus is changed to the output with that name.
-
-**focus** mode_toggle::
-	Toggles focus between floating view and tiled view.
-
-**focus_follows_mouse** <yes|no>::
-	If set to _yes_, the currently focused view will change as you move your
-	mouse around the screen to the view that ends up underneath your mouse.
-
-**fullscreen**::
-	Toggles fullscreen status for the focused view.
-
-**for_window** <criteria> <command>::
-	Whenever a window that matches _criteria_ appears, run list of commands. See
-	**Criteria** section below.
-
-**gaps** edge_gaps <on|off|toggle>::
-	Whether or not to add gaps between views and workspace edges if amount of
-	inner gap is not zero. When _no_, no gap is added where the view is aligned to
-	the workspace edge, effectively creating gaps only between views.
-
-**gaps** <amount>::
-	Sets default _amount_ pixels as the gap between each view, and around each
-	workspace.
-
-**gaps** <inner|outer> <amount>::
-	Sets default _amount_ pixels as the _inner_ or _outer_ gap, where the former
-	affects spacing between views and the latter affects the space around each
-	workspace.
-
-**gaps** <inner|outer> <all|workspace|current> <set|plus|minus> <amount>::
-	Changes the gaps for the _inner_ or _outer_ gap. _all_ changes the gaps for
-	all views or workspace, _workspace_ changes gaps for all views in current
-	workspace (or current workspace), and _current_ changes gaps for the current
-	view or workspace.
-
-**kill**::
-	Closes the currently focused view.
-
-**layout** <mode>::
-	Sets the layout mode of the focused container. _mode_ can be one of _splith_,
-	_splitv_, or _toggle split_.
-
-**mode** <mode_name>::
-	Switches to the given mode_name. the default mode is simply _default_. To
-	create a new mode in config append _{_ to this command, the following lines
-	will be keybinds for that mode, and _}_ on its own line to close the block.
-
-**move** <left|right|up|down>::
-	Moves the focused container _left_, _right_, _up_, or _down_.
-
-**move** <container|window> to workspace <name>::
-	Moves the focused container to the workspace identified by _name_.
-	_name_ may be a special workspace name. See **workspace**.
-
-**move** <container|window|workspace> to output <name|direction>::
-	Moves the focused container or workspace to the output identified by _name_ or
-	_direction_. _direction_ may be one of _up_, _down_, _left_, _right_.
-
-**mouse_warping** <output|none>::
-	When _output_: place mouse at center of newly focused window when changing
-	output. When _none_: don't move mouse.
-
-**output** <name> <resolution|res> <WIDTHxHEIGHT>::
-	Configures the specified output to use the given resolution.
-
-**output** <name> <position|pos> <X,Y>::
-	Configures the specified output to be arranged at the given position.
-
-**output** <name> <background|bg> <file> <mode>::
-	Sets the wallpaper for the given output to the specified file, using the given
-	scaling mode (one of "stretch", "fill", "fit", "center", "tile").
-
-**output** <name> disable::
-	Disables the specified output.
-
-**NOTES FOR THE OUTPUT COMMAND**::
-	You may combine output commands into one, like so:
-	+
-	output HDMI-A-1 res 1920x1080 pos 1920,0 bg ~/wallpaper.png stretch
-	+
-	You can get a list of output names like so:
-	+
-	swaymsg -t get_outputs
-	+
-	You may also match any output by using the output name "*". Be sure to add
-	this output config after the others, or it will be matched instead of the
-	others.
-
-**reload**::
-	Reloads the sway config file without restarting sway.
-
-**resize** <shrink|grow> <width|height> <amount>::
-	Resizes the currently focused container or view by _amount_. _amount_ can be
-	specified as "n px" or "n ppt" or "n px or n ppt".
-
-**seamless_mouse** <on|off>::
-	Change output seamlessly when pointer touches edge of output. Outputs need to
-	be configured with perfectly aligned adjacent positions for this option to
-	have any effect.
-
-**set** <name> <value>::
-	Creates a substitution for _value_ that can be used with $_name_ in other
-	commands.
-
-**split** <vertical|v|horizontal|h>::
-	Splits the current container, vertically or horizontally.
-
-**splith**::
-	Equivalent to **split horizontal**.
-
-**splitv**::
-	Equivalent to **split vertical**.
-
-**sticky** <enable|disable|toggle>::
-	If enabled and the windows is floating it will always be present on the active
-	workspace on that output.
-
-**workspace** <name>::
-	Switches to the specified workspace.
-
-**workspace** <prev|next>::
-	Switches to the next workspace on the current output or on the next output
-	if currently on the last workspace.
-
-**workspace** <prev_on_output|next_on_output>::
-	Switches to the next workspace on the current output.
-
-**workspace** <name> output <output>::
-	Specifies that the workspace named _name_ should appear on the specified
-	_output_.
-
-Criteria
---------
-
-A criteria is a string in the form of e.g.:
-
-	[class="[Rr]egex.*" title="some title"]
-
-The string contains one or more (space separated) attribute/value pairs and they
-are used by some commands filter which views to execute actions on. All attributes
-must match for the criteria string to match.
-
-Currently supported attributes:
-
-**class**::
-	Compare value against the window class. Can be a regular expression. If value
-	is _focused_ then the window class must be the same as that of the currently
-	focused window.
-
-**id**::
-	Compare value against the app id. Can be a regular expression.
-
-**title**::
-	Compare against the window title. Can be a regular expression. If value is
-	_focused_ then the window title must be the same as that of the currently
-	focused window.
-
-**workspace**::
-	Compare against the workspace name for this view. Can be a regular expression.
-	If value is _focused_ then all the views on the currently focused workspace
-	matches.